LifeSpanEd

Paul Carter Paul Carter

0 Course Enrolled • 0 Course Completed

Biography

NGFW-Engineer Test Questions Answers | NGFW-Engineer Reliable Test Answers

It is certain that the pass rate of our NGFW-Engineer study guide among our customers is the most essential criteria to check out whether our NGFW-Engineer training materials are effective or not. The good news is that according to statistics, under the help of our NGFW-Engineer learning dumps, the pass rate among our customers has reached as high as 98% to 100%. It is strongly proved that we are professonal in this career and our NGFW-Engineer exam braindumps are very popular.

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

Topic
Details

Topic 1

Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.

Topic 2

PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active
active and active
passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.

Topic 3

PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.

>> NGFW-Engineer Test Questions Answers <<

NGFW-Engineer Reliable Test Answers | Frequent NGFW-Engineer Updates

You will obtain these updates entirely free if the Palo Alto Networks NGFW-Engineer certification authorities issue fresh updates. TorrentVCE ensures that you will hold the prestigious Palo Alto Networks NGFW-Engineer certificate on the first endeavor if you work consistently, taking help from our remarkable, up-to-date, and competitive Palo Alto Networks NGFW-Engineer dumps.

Palo Alto Networks Next-Generation Firewall Engineer Sample Questions (Q29-Q34):

NEW QUESTION # 29
Which two statements describe an external zone in the context of virtual systems (VSYS) on a Palo Alto Networks firewall? (Choose two.)

A. It is a security object associated with a specific virtual router of a VSYS.
B. It is not associated with an interface; it is associated with a VSYS itself.
C. It is a security object associated with a specific VSYS.
D. It is associated with an interface within a VSYS of a firewall.

Answer: C,D

Explanation:
In the context of virtual systems (VSYS) on a Palo Alto Networks firewall, the external zone is typically associated with specific interfaces within a VSYS. Zones are fundamental security objects used to define traffic flow between interfaces, and the external zone would be used for interfaces that connect to external networks.
An external zone is associated with an interface within a VSYS of the firewall. This ensures that traffic from specific interfaces can be classified as belonging to the external zone, allowing the firewall to apply appropriate security policies.
The external zone is indeed a security object that is specific to a given VSYS, as each VSYS can have its own set of zones that are isolated from others.

NEW QUESTION # 30
Which interface types should be used to configure link monitoring for a high availability (HA) deployment on a Palo Alto Networks NGFW?

A. Tap, Virtual Wire, and Layer 3
B. Virtual Wire, Layer 2, and Layer 3
C. HA, Layer 2. and Layer 3
D. HA, Virtual Wire, and Layer 2

Answer: B

Explanation:
When configuring link monitoring for high availability (HA) on a Palo Alto Networks NGFW, the following interface types are supported:
Virtual Wire: Used when you have a transparent mode firewall deployment, where the firewall operates at Layer 2 to monitor traffic between two network segments.
Layer 2: Also used in transparent mode, where the firewall operates as a Layer 2 device and can be configured for link monitoring.
Layer 3: Used in routed mode, where the firewall is involved in routing traffic and can also be configured to monitor links.

NEW QUESTION # 31
An NGFW engineer is establishing bidirectional connectivity between the accounting virtual system (VSYS) and the marketing VSYS. The traffic needs to transition between zones without leaving the firewall (no external physical connections). The interfaces for each VSYS are assigned to separate virtual routers (VRs), and inter-VR static routes have been configured. An external zone has been created correctly for each VSYS. Security policies have been added to permit the desired traffic between each zone and its respective external zone. However, the desired traffic is still unable to successfully pass from one VSYS to the other in either direction.
Which additional configuration task is required to resolve this issue?

A. Add each VSYS to the list of visible virtual systems of the other VSYS.
B. Enable the "allow inter-VSYS traffic" option in both external zone configurations.
C. Create a transit VSYS and route all inter-VSYS traffic through it.
D. Create Security policies to allow the traffic between the two external zones.

Answer: A

Explanation:
In Palo Alto Networks firewalls, each virtual system (VSYS) is typically isolated from other VSYSs, meaning that traffic between different VSYSs cannot pass through the firewall by default. In this case, since the interfaces for each VSYS are assigned to separate virtual routers (VRs), and the desired traffic is still not passing between the two VSYSs, the firewall needs to be explicitly configured to allow traffic between them.
The required configuration is to add each VSYS to the list of visible virtual systems of the other VSYS. This allows inter-VSYS communication to be enabled, effectively permitting the traffic to pass between the zones of different VSYSs.

NEW QUESTION # 32
What is a result of enabling split tunneling in the GlobalProtect portal configuration with the "Both Network Traffic and DNS" option?

A. It allows users to access internal resources when connected locally and external resources when connected remotely using the same FQDN.
B. It specifies which domains are resolved by the VPN-assigned DNS servers and which domains are resolved by the local DNS servers.
C. It specifies when the secondary DNS server is used for resolution to allow access to specific domains that are not managed by the VPN.
D. lt allows devices on a local network to access blocked websites by changing which DNS server resolves certain domain names.

Answer: B

Explanation:
When split tunneling is enabled with the "Both Network Traffic and DNS" option in the GlobalProtect portal configuration, it allows the firewall to control which traffic is sent over the VPN tunnel and which is not. Specifically, it determines which domains are resolved by the VPN-assigned DNS servers (for domains requiring VPN access) and which are resolved by local DNS servers (for domains that can be accessed without the VPN tunnel).

NEW QUESTION # 33
When configuring a Zone Protection profile, in which section (protection type) would an NGFW engineer configure options to protect against activities such as spoofed IP addresses and split handshake session establishment attempts?

A. Flood Protection
B. Protocol Protection
C. Reconnaissance Protection
D. Packet-Based Attack Protection

Answer: B

Explanation:
In the context of a Zone Protection profile, Protocol Protection is the section used to configure protections against activities such as spoofed IP addresses and split handshake session establishment attempts. These types of attacks typically involve manipulating protocol behaviors, such as IP address spoofing or session hijacking, and are mitigated by the Protocol Protection settings.

NEW QUESTION # 34
......

Challenge is omnipresent like everywhere. By eliciting all necessary and important points into our NGFW-Engineer practice materials, their quality and accuracy have been improved increasingly, so their quality is trustworthy and unquestionable. There is a bunch of considerate help we are willing to offer. Besides, according to various predispositions of exam candidates, we made three versions for your reference. Untenable materials may waste your time and energy during preparation process.

NGFW-Engineer Reliable Test Answers: https://www.torrentvce.com/NGFW-Engineer-valid-vce-collection.html

Paul Carter Paul Carter

Biography

About LifeSpanEd

Quick Links

Resources

Support

LifeSpanEd Newsletter